Festo MPA-ASI Series, Manual

Page: 143 / 208

5. Maintenance and conversion
5−15
Festo P.BE−MPA−EN en 0802c
The following electronic modules are available:
Type Description of the electronic module
VMPA1−FB−EM G −8 4 valve locations / 8 outputs
with electrical isolation
VMPA1−FB−EM
G−D2
−8 4 valve locations / 8 outputs
with electrical isolation
with diagnostic functions D2
VMPA1−FB−...
VMPA1−FB−EM S −8 4 valve locations / 8 outputs
without electrical isolation
VMPA1−FB−EM S−D2 −8 4 valve locations / 8 outputs
without electrical isolation
with diagnostic functions D2
VMPA2−FB−EM G −4 2 valve locations / 4 outputs
with electrical isolation
VMPA2−FB−EM G−D2 −4 2 valve locations / 4 outputs
with electrical isolation
with diagnostic functions D2
VMPA2−FB−...
VMPA2−FB−EM S −4 2 valve locations / 4 outputs
without electrical isolation
VMPA2−FB−EM S−D2 −4 2 valve locations / 4 outputs
without electrical isolation
with diagnostic functions D2
Outputs correspond to valve solenoid coils
Tab.5/3: Electronic modules for MPA−S valve terminal with CPX terminal
Further Information on the MPA electronic modules can be
found in the leaflet supplied with the product and in the rel
evant electronics manual for the module (see System Manual
for your CPX terminal, table Manuals on the CPX terminal").