Festo FSS-12-C, Operating Instructions Manual

Page: 23 / 100

Quickstepper
Festo FSS−12−C 0410a English
23
S
Observe the specifications applicable to your location, as well as all local and
national laws and regulations.
S
Use only non−lubricated compressed air.
S
Exposure to external impact can result in
errors. Do not allow objects to fall on the
product.
S
Observe the ambient conditions at your
location.
S
Make sure there is a supply of correctly
prepared compressed air (chapter 13).
S
Use the product in its original state. Un
authorized modification is not permitted.
S
Remove the packing except for the adhes
ive labels on the compressed air connec
tions (to prevent dirt from entering).
The packing is intended for recycling (except
for: oiled paper which must be disposed of ).
6 Fittin g
Fittin g m e c h a ni ca l c o m ponent s
Attach the product on the front panel, front doors, side of the cabinet or in the
control cabinet.
6. 1 Fittin g on the f ront p a nel, f ront d oor s a n d s i d e o f the ca binet
1. Prepare a square cutout on the surface. Fitting dimensions: front frame
92x92mm³, front plate thickness max. 13 mm.
2. Place the front frame FSS−F−12 (Fig.9) in the prepared front panel cutout from
the outside.
Fig.5
Fig.6
Fig.7
LF−... LR−... LD−...
Fig.8