Festo FED Series, Manual

Page: 89 / 115

3. Installation
3−13
Festo FED−... en 0311a
Fig.3/10: Fitting the communication modules
3.6.1 Models without PC/printer port
The FED−50 does not have the PC/Printer Port. The PLC Port
is used here as a combined PLC/PC interface. It can be used
as a programming port when the panel is in Configuration
Mode. These models can also be programmed with the FEDZ−
PC standard programming cable if you connect the sub−D
adapter (gender changer) directly to the PLC/PC interface of
the FEDZ−PC cable. This is supplied with the FEDZ−PC cable. It
is possibly necessary to remove the screws from the gender
changer.
A printer cannot be connected to the FED−50.