4
Mounting
26
Festo – EXCM-40-EN – 2017-11a – English
5. Place washers
6
under the socket head screws
7
.
6. Secure the mounting component
2
to the mount
ing surface with socket head screws
7
.
7. Tighten socket head screws
7
(tightening torque 24 Nm).
7
7
6
2
Fig. 4.23
4.5.2
Manually moving the Y-axis (traverse)
The Y-axis (traverse) can be moved manually for mounting and alignment purposes. The Y-axis (tra
verse) is secured against uncontrolled movements with transport restraints (cable ties) when delivered.
1. Remove the labelled transport restraints (cable
ties) from the moving parts.
2. For motors with holding brake: Remove motors (
è
4.5.4 Dismantling/mounting motors).
3. Manually move the Y-axis (traverse) to the desired position.
4.5.3
Attachments on the energy chain
If mounting points are covered by the energy
chain
3
, this can be detached while observing
the following points:
1. Remove screw
5
and nut
4
.
2. If necessary, remove screws
1
and nuts
2
on
the energy chain retainer as well.
3. Remove the metal sheet
6
.
3
2
1
4
5 6
Fig. 4.24
