Festo EXCM-10-***-E, Translation Of The Original Instructions

Page: 81 / 84

D Glossary
Festo – EXCM-10/-30-...-E-EN – 1612b – English 81
D Glossary
Term/abbreviation Description
Acknowledge “Acknowledge an error”: the user confirms that he has noted the error.
The device then leaves the error status.
Effective stroke Maximum stroke, distance of the software end positions.
EMC Electromagnetic compatibility
FCT Parameterisation and commissioning software
(FCT = Festo Configuration Tool)
FHPP Communication protocol for data exchange
(FHPP = Festo Handling and Positioning Profile)
Following error Calculated deviation during execution of a positioning record between
the target position (in accordance with previously calculated course of
the path) and the actual position.
Homing Positioning job to determine the reference point.
I/O Input/output
Jog mode The drive moves as long as a corresponding signal is present.
Load voltage Power supply of the controller power electronics and thus of the motors.
Logic voltage Power supply of the evaluation and control logic of the controller.
MC (Motion Complete) Target position reached.
PLC/IPC Programmable logic controller/industrial PC.
Record Record of parameters defined in the record table, comprising record type,
target position X and Y, speed and acceleration.
Software end position Limitation of the network stroke.
Tab. D.1 Product-specific terms and abbreviations