DRRD-12 ... 63
28
Festo – DRRD-12 ... 63-Z6 – 1310b English
9
Disassembly and repair
For eccentric masses on the lever arm:
Warning
Danger of injury from masses dropping suddenly.
•
Make sure the payload has reached a stable position before venting (e.g. the lowest
point).
Note
•
Make sure that the semi-rotary drive is vented for disassembly.
•
Recommendation: Send the product to our repair service.
This way the required fine tuning and tests will be taken into special consideration.
•
Information about spare parts and aids can be found at: www.festo.com/spareparts
For replacement of the integrated cushioning components/shock
absorbers (
10 Accessories):
•
Proceed as follows:
1. Vent the DRRD.
2. Measure the position of the shock absorber (dimension XP
or XY) and loosen the lock nut on the shock absorber
8
.
3. Unscrew the shock absorber and:
–
Lubricate the new cushioning component
(e.g. with LUB-KC1) and mount it (for DRRD-...-P).
Use new sealing discs (
(B) in Fig. 10), if required
–
Replace shock absorber (for DRRD-...-Y9/Y10).
Use new sealing discs (
(C) in Fig. 10), if required.
4. Screw in shock absorbers up to dimension XP or XY (
point 2).
5. Check the angle adjustment and correct, if necessary.
6. Tighten the lock nut on the shock absorber
8
(tightening
torque
Tab. 5).
Fig. 10
(B)
(C)
Summary of Contents for DRRD-35
Page 75: ...DRRD 12 63 Festo DRRD 12 63 Z6 1310b 75 3 12 20 10 12 HEL...
Page 78: ...DRRD 12 63 78 Festo DRRD 12 63 Z6 1310b 5 2 GRLA Fig 5 HGL VZS 5 3 A 9 10 9 Fig 6 A 9...
Page 85: ...DRRD 12 63 Festo DRRD 12 63 Z6 1310b 85 10 www festo com catalogue 11 DRRD Festo 10 9 Tab 8...
