30 / 46
Festo 7DHTGb_en
• Lever the wiper seal out of the two bolt guides.
4.2
Assembling the rotary indexing table
Note
Removed sealing rings and retaining rings must be replaced during assembly.
4.2.1
Assembling the bolts
Note
The open side of the wiper seal must face the top side of the housing.
• Place the new wiper seals in the bolt guides.
• Press the new wiper seals into their holder using your finger or a suitable
blunt object.
Note
The open side of the piston seal must face the outside of the bolt.
• Insert the new piston seals (arrow) into position on both bolts.
