Festo CPX-FB38, Electronic Manual

Page: 53 / 120

2. Commissioning
2−17
Festo P.BE−CPX−FB38−EN en 0804NH
Module
no. Module Input address Output address
0 Bus node CPX−FB38
1 Digital 8−input module CPX−8DE I32
Ū
I39
2 Digital 4−output module CPX−4DA O128
Ū
O135
*)
3 CP interface CPX−CP...
(In this case: 4 bytes I, 16 bytes O) I0
Ū
I32 O0
Ū
O127
4 Digital multi−I/O module CPX−8DE−8DA I40
Ū
I47 O136
Ū
O143
5 MPA1 pneumatic module (8 O) O144
Ū
O151
6 MPA1 pneumatic module (8 O) O152
Ū
O159
*)
8 bits occupied, 4 bits used
Tab.2/10: Addressing the example terminal 2 (see Fig.2/2)
Example 3: CPX terminal with analogue module and
VTSApneumatics
Fig.2/3 shows as an example a CPX terminal with analogue
module and VSTA pneumatics as well as the following setting:
Status bits activated
VTSA pneumatic interface set to 1
Ū
8 valve coils (8 O)
The address assignment for this example terminal
(inFig.2/3) is shown in Tab.2/11.