Festo CPX-F8DE-P, Manual

Page: 78 / 90

78 Festo — CPX-F8DE-P — 2022-10d
Diagnostics and error handling
FP LED (FP for fail-safe mode protocol)
LED (green) Sequence PROFIsafe state Significance/error handling
LED on
–
Fail-safe mode protocol active
–
Input module communicates with
an F-Host via PROFIsafe protocol.
LED is off
–
Input module is in a safe shut-
down condition –
Tab. 38: FP LED
–
After remedial action, reintegrate the input module.
6.3.1 Behaviour in response to original module errors
Channel
error LED FP PED Module
error LED Error
no. Fault description Remedy
5 Undervoltage in supply
voltage
–
Correct supply voltage
or remedy short circuit.
61 Overvoltage in supply
voltage
–
Correct supply voltage.
65 Set PROFIsafe address
does not correlate with
safety parameterisation
(F_Dest_Add)
–
Check and correct set
address/parameter
è
3.4 Setting the PRO-
FIsafe address and
è 4.8 Configuration
with SIEMENS STEP 7
(example).
–
Transmit new parame-
ters.
66 Error in safe communica-
tion
–
Remedy source of mal-
function.