manualshive.com logo in svg

Festo CPX-AP-A, Operating Instructions Manual

Share
Download
Festo CPX-AP-A Operating Instructions Manual Download Page 16

16

Festo — CPX-AP-A — 2022-07

Assembly

6

Assembly

6.1

Mounting types

The following mounting types are available, depending on the version:

Mounting

Wall

Mounting system

H-rail

CPX-AP-A modules

Mounting bracket
CAFM-X5-A

Mounting bracket
CAFM-X5-K

Mounting
CAFM-X5-H

Tab. 5: Mounting types

Mounting conditions and dynamic load 

è

 Instructions, assembly for CPX-VTSA.

6.1.1

H-rail mounting

The mounting points of the automation system are restricted to the end plates. The interlinking
module and end plates are attached to the H-rail.

1

2

Fig. 14: H-rail mounting

1

Clamping piece

2

H-rail

1. Make sure the mounting surface supports the weight
2. Mount the H-rail and make sure there is enough free space for connections.
3. Mount H-rail every 100 mm on the mounting surface.
4. Mount the clamping piece on the right and left end plates.
5. Attach the automation system to the upper slot of the H-rail.
6. Swivel the automation system to the H-rail.

Summary of Contents for CPX-AP-A











































Reviews:

No comments

Brands by name

Popular brands

Load more brands