Festo — CPX-4AE-4AA-H — 2021-06b
Assembly
13
1
2
3
4
5
Fig. 6: Remove coding piece
1
Cover with interlock
2
Tool (e.g. pin)
3
Coding piece
4
Manifold block
5
Plugs
1. Place the manifold block
4
on a flat surface with the top up.
2. Unlock and remove the cover
1
.
3. Press out the coding piece
3
with a suitable tool
2
.
4. Push the cover onto the plug of the manifold block
5
.
5.3
Mounting the electronics module and manifold block
Requirements
–
Supply voltage is switched off.
–
The interlinking block is clean and free of foreign matter.
–
DIL switches are set
