Festo CPV..-GE-ASI-... 2017-11e English
12
4.4 Connection example – valve terminal type 10
1
AS-Interface master
2
Combination
powersupply from
Festo (electronically
safeguarded/short-
circuit proof )
3
Load voltage can be
switched off (see
section 4.2)
1
2
3
4.5 Converting the valve terminal
The valve terminal can be fitted with double-solenoid
and/or single-solenoid valves. During conversion, the new
valve terminal configuration must be set with the DIP
switches on the bottom of the electric sub-base.
1
DIP switch for the
valve configuration
on the bottom of the
sub-base
1
Permitted valve combinations and relevant DIP switch
settings see table in section 3.3.
