Festo CPA-SC Series, Manual

Page: 119 / 140

A. Technical appendix
A−3
Festo P.BE−CPASC−EN en 0808c
A.1 Technical specifications
General information
Permitted temperature range
Storage
Medium −20
Ū
+50 °C
−5
Ū
+50 °C
Ambient temperature
CPA−SC valve terminal with DI connection
Valves with Ident. code
M, J, B, G, E, X
−5
Ū
+50 °C
Valves with Ident. code
N, K, I
−5
Ū
+40 °C (+50 °C
1)
)
Protection class as per EN 60529
IP40
Relative air humidity 5
Ū
90 % at 40 °C, non−condensing
Protection against corrosion (as per FN 940070) CRC 1
Installation position as desired
Tightening torques
Fastening to a wall
Components on valve locations 1 Nm
0.3 Nm −20 %
Materials
Manifold block
Valve sub−base
Seal
AL
GD−AL, PPS, ST, PA−GF
NBR, HNBR, Fluor rubber (FPM)
Vibrations and shock
Vibration
tested as per DIN/IEC 68/EN 60068 part 2−6
with hat rail fastening:
with wall fitting:
Shock
tested as per DIN/IEC 68/EN 60068 part 2−27
with hat rail fastening:
with wall fitting:
Continuous shock
tested as per DIN/IEC 68/EN 60068 part 2−29
CPA−SC with
MP connection
severity level 2
severity level 2
severity level 2
severity level 2
severity level 1
CPA−SC with
DI connection
severity level 1
severity level 2
severity level 1
severity level 2
severity level 1
1)
With non−simultaneous continuous energizing of two valves in one valve module
Tab.A/1: General technical data