Festo CMMT-ST-SW, Original Instructions Manual

Page: 514 / 616

Tab Description
Info Shows the following information:
–
Status information of the device (e. g. order reference and hardware ver-
sion)
– Dynamic measurement values (e. g. temperature of output stage, logic
power supply, current position of drive)
– Signal statuses of digital inputs and outputs, active signals are marked with
a blue dot. Inactive signals are marked with a grey dot.
Parametersation Offers the following commands:
–
Commands to set the IP configuration
– Activation of identification sequence (for visual identification of the device
in a network)
– Upload and download of firmware
– Upload and download of parameter sets
– Reset of all parameters to factory settings
Diagnosis Enables the diagnostics of the servo drive
–
Access to the error history
– Display of current messages from the device
– Acknowledgement of all cancelled messages
Tab. 453 Register of the website of the web server
Parameters
ID Px. Parameters Description
Activation of the web server
–
0: inactive
– 1: active
Access read/write
Update restart
11280051 Web server activation
Unit −
Tab. 454 Parameters
10.2 CiA 402
Web server objects
Parameters Index.Subindex Name Data type
Px. Manufacturer-specific objects: saved basic unit for the object is effective.
11280051 0x21A4.01 Web server activation BOOL
Tab. 455 Objects
Web server
514 Festo — CMMT-ST-SW — 2019-02