Festo — CMMT-ST-C8-1C-...-S0 — 2021-04b
Technical data
45
9
Disassembly
WARNING
Danger of burns from hot housing surfaces.
Metallic housing parts can reach high temperatures during operation.
Contact with metal housing parts can cause burn injuries.
• Do not touch metallic housing parts.
• After the power supply is switched off, let the device cool down to room temperature.
Disassemble in reverse order of installation.
Before disassembly
1. Switch off the power supply at the main switch.
2. Secure the system against accidental reactivation.
3. Allow the device cool down to room temperature.
4. Disconnect all electrical cables.
Disassembly for wall mounting
•
Loosen retaining screws (2x) and remove the device from the mounting surface.
Disassembly for H-rail mounting
•
Carefully tilt the servo drive upwards and remove it from the H-rail.
Fig. 14: Disassembly from the H-rail
10
Technical data
