Festo CESA-GW-AS-CO, Installation And Operation Manual, Page: 45 / 83

CESA-GW-AS-CO Description
45
The analog outputs can be changed after selecting an AS-i slave.
6.9.5 PARAMETER
Main menu || IO + PARAM.TEST || PARAMETER ||
This function displays the hexadecimal value of the current AS-i parameters for
all AS-i slaves.
The current AS-i parameters can be changed after selecting a slave address.
6.10 DIAGNOSIS
Main menu || DIAGNOSIS ||
For additional information refer to chap. <Advanced Diagnostics for AS-i Mas-
ters>.
ANALOG OUT 1
0 +2500
1 +17898
2 +32767 OVERFL
3 -20023
PARAMETER
| 1A - 0
2A - 2| 3A - F
4A - E| 5A - 3
⇓
FLAGS
ACTUAL CONFIG
LPF
AS-I MASTER
FLAGS: Display of the EC-Flags
ACTUAL CONFIG: Display of the current configuration
LPF: List of Peripheral Faults
AS-I MASTER: Display of the software states