Festo 8060571, Repair Instructions

Page: 7 / 52

7 / 52 Festo 7ELCC_TB_KFb_en
Marking special information
The following symbols identify text passages which contain special information.
Note
Information
Documents
Environment
1.3 Text designations used in these repair instructions
• Activities that can be carried out in any order.
. 1 Activities which should be carried out in the specified order.
– General list

Result of an activity / references to further information
Underlined, blue text indicates a cross-reference or hyperlink that you can click on in the PDF.
1.4 General safety information
Warning
Failure to comply with these safety instructions and information can result in serious injuries.
• Read and follow all safety instructions and information.
• Wear personal protective equipment, depending on the work situation.
• For information on the potential risks to humans when handling lubricating grease, oil, locking agent, cleaning
agent and other chemicals, which are used for the repair, protection against these risks and first aid measures,
refer to the safety instructions on the packagings of the named materials and the current safety data sheets (in
accordance with Regulation (EC) No. 1907/2006) (
 www.festo.com/msds ,  Website of the product manufac-
turer).
• Take into consideration the legal regulations for the respective destination.
• Repairs must only be carried out in conjunction with these repair instructions as well as the respective operating
instructions of the device and the documents named in Chapter 1.1 on page 6 .
Danger
Risk of fatal injury due to electric shock and uncontrolled movement of components.
• Before carrying out maintenance and repair work, shut down the product as described in the operating instruc-
tions (

www.festo.com ).
• Disconnect the product from the power supply and depressurise it.
• Reliably secure the product against unauthorised restarting.
• Secure the components against uncontrolled movements or move them into a safe end position.
The control of the drive motors is still charged after the voltage has been switched off (capacitor voltage).
• After switching off the voltage, wait approx. 3 minutes before removing the motor cables. The capacitors discharge
their voltage during this time.