HARDWARE
Page 4 of 6
1 GENERAL SAFETY INSTRUCTIONS
1.1 Commissioning
Before using this blow gun, some simple assembly is required.
To properly assemble the blow gun, proceed as follows:
1. Screw the compressed air coupling onto the gun;
2. Connect the compressor
1.2 Operating the gun
To blow just squeeze the trigger on the gun, when the trigger is released the air jet stops
instantly.
The greater the pressure on the trigger, the greater the flow of air released from the gun.
Do not point the jet of air at people or animals.
1.3 Personal Protective Equipment
Errore. Il segnalibro non è definito.
When using the blow gun always wear safety glasses.
Figure 1 - Safety glasses
1.4 Technical assistance
Errore. Il segnalibro non è definito.
For any problems and/or concerns please contact the
Errore. Il segnalibro non è
definito.
dealer from whom you purchased the blow gun, who can order spare parts if
required.
fervi.com
