Ferroli SUN P N Series, Instructions For Use, Installation And Maintenence

Page: 34 / 220

SUN P N
34
EN
cod. 3541F710 - Rev. 00 - 05/2017
Parameters menu
The card Service Menu is accessed by pressing the Info button (detail 11 - fig. 1) for 10 seconds. Press the Up/Down
buttons to select “tS”, “In”, “Hi” or “rE”. “tS” means Transparent Parameters Menu, “In” means Information Menu, “Hi”
means History Menu, “rE” means History Menu Reset. After selecting the menu, press the Info button to access it.
“ts” - Transparent parameters menu
Table. 4
Remote
Control
Card Transparent Parameters Range Default /
SUN P7 N
SUN P12 N
01 t01 Pellet loading function 0=Disabled
1=Enabled 0=Disabled 0=Disabled
02 t02 Delivery probe 0=Disabled
1=Enabled 1=Enabled 1=Enabled
03 t03 Fan setpoint in Lighting 0-200 Pa 51 Pa 51 Pa
04 t04 Auger activation time in Lighting 0-100
(1=4 seconds) 8 (32 seconds) 8 (32 seconds)
05 t05 Adjustment calculation timer (only with t18=1
and t18=2) 0-100 seconds 5 seconds 5 seconds
06 t06 Ramp function timer 0-255 seconds 150 seconds 150 seconds
07 t07 Auger operation period (activation time + deacti-
vation) 0-50 seconds 15 seconds 12 seconds
08 t08 Fan setpoint at Power 1 0-200 Pa 51 Pa 51 Pa
09 t09 Auger activation time at Power 1 0-100
(100=10 seconds) 28 (2.8 seconds) 38 (3.8 seconds)
10 t10 Fan setpoint at Power 2 0-200 Pa 74 Pa 70 Pa
11 t11 Auger activation time at Power 2 0-100
(100=10 seconds) 38 (3.8 seconds) 40 (4.0 seconds)
12 t12 Fan setpoint at Power 3 0-200 Pa 120 Pa 100 Pa
13 t13 Auger activation time at Power 3 0-100
(100=10 seconds) 46 (4.6 seconds) 45 (4.5 seconds)
14 t14 Fan setpoint at Power 4 0-200 Pa 150 Pa 120 Pa
15 t15 Auger activation time at Power 4 0-100
(100=10 seconds) 53 (5.3 seconds) 60 (6.0 seconds)
16 t16 Fan setpoint at Power 5 0-200 Pa 170 Pa 155 Pa
17 t17 Auger activation time at Power 5 0-100
(100=10 seconds) 56 (5.6 seconds) 65 (6.5 seconds)
18 t18 Burner operation selection (only with t02=1) 0=On/Off
1=Modulating
2=Modulating 2 0=On/Off 0=On/Off
19 t19 Post-ventilation 2 Time 0-255
(100=10 seconds) 200 (20 seconds) 200 (20 seconds)
20 t20 Photoresistance voltage (display only) 0-50 (50=5Vdc) -- --
21 t21 Auger activation function in Lighting 0=Continuous
1=Cycle On/Off 0=Continuous 0=Continuous
22 t22 Photoresistance voltage threshold 0-100 (100=1Vdc) 50 50
23 t23 Burner type selection 1=P7/ECO 3.4 P
2=P12
3=ECO 5.5 P 1=P7/ECO 3.4 P 2=P12
24 P24 System water pressure protection selection 0=No Pressure switch,
1=Pressure switch 0=No Pressure
switch
0=No Pressure
switch
25 P25 Boiler type selection 1=Heating only
2=Storage with probe
3=Storage with probe
4=Instantaneous 1 1
26 P26 Heating pump activation temperature (P25=1) 0-80°C 30°C 30°C
Heating pump activation temperature (P25=2) 0-80°C 30°C 30°C
Heating pump activation temperature (P25=3) 0-80°C 30°C 30°C
Heating pump activation temperature (P25=4) 0-80°C 30°C 30°C
27 P27 Post-circulation
Heating pump 0-20 minutes 6 minutes 6 minutes
28 P28 Heating standby time 0-10 minutes 2 minutes 2 minutes
29 P29 Pump operation 0=Post-Circulation
1=Continuous 0=Post-Circulation 0=Post-Circulation