Ferroli OMNIA HYBRID C, Installation, Maintenance And User Manual

Page: 38 / 116

38
EN
Cod. 3541T090 - Rev. 00 - 06/2019
REMOTE CONTROLLER - USER MENU
7.5 Turning ON/OFF controls
Use the interface to turn on or off the unit for space heating or cooling.
■ The ON/OFF of the unit can be controlled by the interface if the ROOM TEHER-
MOSTAT is NON.(see ROOM THERMOSTAT SETTING on paragraph “8.8 Room
thermostat (ON/OFF - HEAT/COOL by digital input)”)
■ Press ‘’◄’’ ,’’▲’’ on home page,the black cursor will appear:
SET
C
ON MAIN
21: 55 08 - 08 - 2015 SAT.
18
fig. 52 -
1)When the cursor is on space operation mode side (Including heat mode ,
cool mode and auto mode A), press ‘’ON/OFF’’ key to turn on/off the operation
mode .
SET
C
ON
MAIN
21: 55 08 - 08 - 2015 SAT.
18
SET C
OFF
MAIN
21: 55 08 - 08 - 2015 SAT.
18
ON/OFF ON/OFF
fig. 53 -
SET
C
21: 55 08 - 08 - 2015 SAT.
ON
ROOM
27
SET
C
21: 55 08 - 08 - 2015 SAT.
OFF
ROOM
27
ON/OFF ON/OFF
fig. 54 -
If the ROOM THERMOSTAT is set YES (for more details refer to paragraph “8.8
Room thermostat (ON/OFF - HEAT/COOL by digital input)”) the unit is turned ON/
OFF by the room thermostat, if you press ON/OFF on the remote controller the
page will dysplay:
22:20 22-08-2018 SAT
Cool/heat mode is controlled by
the room thermostat.
The cool or heat mode is closed.
Please open the mode by the room
thermostat.
CONFIRM
OK
fig. 55 -
7.6 Change the water setpoint and the room setpoint
To change the water set point from page A of the home page press the cursor ‘’ ▼
‘’ to select the set point, then use the cursors ‘’ ▼ ‘’, ‘’ ▲ ‘’ to change the working
setpoint of the ‘water.
SET
c
ON MAIN
21: 55 08 - 08 - 2015 SAT.
A
ON/OFF
ON/OFF
SET
c
ON
MAIN
21: 55 08 - 08 - 2015 SAT.
A
ON/OFF
ON/OFF
12
18
SCROLL ADJUST
SCROLL ADJUST
fig. 56 -
Quindi per modificare il set point ambiente premere il cursore “►” per spostarsi
nella pagina B della home page.
SET
C 27
21: 55 08 - 08 - 2015 SAT.
ON
MAIN
A
SET
c
ON
ROOM
21: 55 08 - 08 - 2015 SAT.
A
ON/OFF
ON/OFF
SET
c
ON ROOM
21: 55 08 - 08 - 2015 SAT.
A
ON/OFF
ON/OFF
25
27
SCROLL ADJUST
SCROLL ADJUST
fig. 57 -
Per modificare il set point ambiente premere il cursore ‘’▼’’ per selezionare il set
point, quindi usare i cursori ‘’▼’’,’’▲’’ per modificare il setpoint ambiente.