FORCE W
157
EN
cod. 3541Q760 - Rev. 00 - 01/2019
Legend
- Parameters
Each system requires a different parameterization. Follow the access procedure given below.
“Configuration - Parameters Menu”
Check/Change parameter
b02
of the “Configuration - Parameters Menu” to
9
.
Check/Change parameter
b08
of the “Configuration - Parameters Menu” to
1
.
Check/Change parameter
b04, b05 and b06
of the "Configuration - Parameters Menu" according to the values given
in the table *** 'Configuration - Parameters Menu' on page 166 ***.
- Parameters FZ4B
See relevant manual in Kit.
72a
1st zone (mixed) room thermostat
317a
1st zone (mixed) safety thermostat
72b
2nd zone (mixed) room thermostat
317b
2nd zone (mixed) safety thermostat
72c
3rd zone (direct) room thermostat
318a
1st zone (mixed) circulating pump
130
Hot water tank circulating pump
318b
2nd zone (mixed) circulating pump
138
External probe
318c
3rd zone (direct) circulating pump
139a
1st zone (mixed) Remote Timer Control
319a
1st zone (mixed) delivery sensor
139b
2nd zone (mixed) Remote Timer Control
319b
2nd zone (mixed) delivery sensor
139c
3rd zone (direct) Remote Timer Control
M
Delivery
155
Hot water tank probe
R
Return
300
Legionella protection circulating pump
315a
1st zone (mixed) mixing valve
a
1st zone (mixed)
A =
OPENING PHASE
b
2nd zone (mixed)
B =
NEUTRAL
c
3rd zone (direct)
C =
CLOSING PHASE
d
Hot water tank circuit
315b
2nd zone (mixed) mixing valve
A =
OPENING PHASE
B =
NEUTRAL
C =
CLOSING PHASE
I*
ISPESL safety devices (when required - not supplied)
To manage the sliding temperature it is necessary to purchase the external probe accessory code 013018X0
If a hot water tank probe (not supplied) is used, it is necessary to purchase the NTC probe accessory code 1KWMA11W (2 mt.)
or code 043005X0 (5 mt.)
If a hot water tank thermostat (not supplied) is used, it is necessary to purchase the accessory kit code 013017X0 (to be connec-
ted in place of the Hot Water Tank Probe)
