background image

FORCE W

126

EN

B

The CE marking certifies that the products meet the essential requirements of the rele-
vant directives in force.
The declaration of conformity may be requested from the manufacturer.

COUNTRIES OF DESTINATION: IT - ES - RO

This symbol indicates 

“CAUTION”

 and is placed next to all safety warnings. Strictly follow these instructions in order to avoid 

danger and damage to persons, animals and things

This symbols calls attention to a note or important notice.

This symbol, which is used on the product, packaging or documents, means that at the end of its useful life, this product must 
not be collected, recycled or disposed of together with domestic waste.
Improper management of electric or electronic waste can lead to the leakage of hazardous substances contained in the pro-
duct. For the purpose of preventing damage to health or the environment, users are kindly asked to separate this equipment 
from other types of waste and to ask for it to be dealt with by the municipal waste service or dealer under the conditions and 
according to the methods set down in national and international laws transposing the Directive 2012/19/EU.
Separate waste collection and recycling of unused equipment helps to save natural resources and to guarantee that this waste 
is processed in a manner that is safe for health and the environment.
For more information about how to collect electric and electronic equipment and appliances, please contact your local Council 
or Public Authority competent to issue the relevant permits.

cod. 3541Q760  -  Rev. 00  -  01/2019

• Read the warnings in this instruction booklet ca-

refully since they provide important information
on safe installation, use and maintenance.

• This instruction booklet is an integral and essen-

tial part of the product and must be kept with
care by the user for future reference.

• If the unit is sold or transferred to another owner

or if it is to be moved, always make sure the bo-
oklet stays with the boiler so that it can be con-
sulted by the new owner and/or installer.

• Installation and maintenance must be carried

out by professionally qualified personnel, accor-
ding to current regulations and the manufactu-
rer's instructions.

• Incorrect installation or inadequate maintenance

can result in damage or injury. The manufactu-
rer declines any liability for damage caused by
errors in installation and use or by failure to fo-
llow the instructions provided.

• Before carrying out any cleaning or maintenan-

ce operation, disconnect the unit from the power
supply using the system switch and/or the spe-
cial cut-off devices.

• In case of a fault and/or poor operation, deacti-

vate the unit and do not try to repair it or directly
intervene. Contact professionally qualified per-
sonnel. Any repair/replacement of the products
must only be carried out by qualified personnel
using genuine parts. Failure to comply with the
above can compromise the safety of the unit.

• Periodic maintenance performed by qualified

personnel is essential in order to ensure proper
operation of the unit.

• This unit must only be used for its intended pur-

pose. Any other use is deemed improper and
therefore hazardous.

• After unpacking, check the good condition of the

contents. The packing materials are potentially
hazardous and must not be left within the reach
of children.

• The unit can be used by children aged at least 8

years and by persons with reduced physical,
sensory or mental capabilities, or lacking expe-
rience or the necessary knowledge, only if under
supervision or they have received instructions
on its safe use and the related risks. Children
must not play with the unit. Cleaning and main-
tenance intended to be done by the user can be
carried out by children aged at least 8 years only
if under supervision.

• In case of doubt, do not use the unit. Contact the

supplier.

• The unit and its accessories must be appropria-

tely disposed of in compliance with current regu-
lations.

• The images given in this manual are a simplified

representation of the product. In this representa-
tion there may be slight and insignificant diffe-
rences with respect to the product supplied.

Summary of Contents for FORCE W
































































Reviews: