19
E-Z Dump Box & Mount Installation
02
Figure 31. Latch Rod Installation
A.
Latch Rod
D. Box Handle
B.
Ball Joint
E. Hair Pin
C.
Latch Plate
Figure 32. Door Linkage Rod Installation
A.
Linkage Rod
D. Clevis Pin
B.
Thread Through Nut
E. Rue Ring Cotter Pin
C.
Adjustment Rod
F. Door Frame Assembly
Install the Latch Rod
1. Assemble the ball joint (B, Figure 31) onto the end of
the latch rod (A).
2. Assemble the ball joint (B) to the latch plate (C) and
secure with the nut.
3. Adjust the rod length so the rod end is aligned with
the hole on the box handle (D).
4. Install the latch rod in the box handle and secure
with the hair pin (E).
Install the Door Linkage Rods
1. Insert the thread through nut (B, Figure 32) into the
slot in the end of the linkage rod (A).
2. Thread the adjustment rod (C) into the thread
through nut. Repeat for other rod.
3. Install the linkage rods onto the door frame assembly
(F) and secure with the clevis pins (D) and rue ring
cotter pins (E).
A
C
D
A
E
A
C
D
E
B
B
A
F
