FERRI ZMLE Series, Use And Maintenance Manual, Page: 33 / 124

33
Rev. 2.0
ZMLE
TECHNICAL CHARACTERISTICS
03-Descrizione generale della macchina (ZMLE)
3 TECHNICAL CHARACTERISTICS
3.1 General description of the machine
Trade name Machine code
ZMLE 1400 ZX14R
ZMLE 1600 ZX16R
The SHREDDERS of the ZMLE series, was designed, built and protected for use exclusively in the agricultural and
road upkeeping sectors for cutting grass, reeds, bushes and shrubs with a diameter of up to 4 cm approx. (1.57 inches).
In the design and construction, all necessary measures were taken to produce a high-quality, reliable product, fully
complying with the regulations in force and with particular regard to accident prevention.
The machines to which this manual refers are carried by the tractor by means of a three-point hitch and they act on
the ground depending on their own weight and on the rotation of the flail rotor activated by the power take-off.
These machines are composed of a structure in which the working part is formed by a rotor with a horizontal axis.
Shaped flails which rotate at a faster speed than the moving speed are connected to this rotor.
The machines are equipped with a system for adjusting the working height, obtained by means of lateral runners and
a rear roller.
The machine is not indicated for use in sectors other than agriculture and road upkeeping.
The machine must be used by one operator.
Any use other than that specified is considered unauthorised and dangerous (improper
use).
WARNING