Kapitelüberschrift
31
6. FUEL MIXING TABLE
Mixing Procedure: 40 parts petrol to 1 part 2-stroke oil.
Petrol
2-stroke oil
1 litre
25 ml
5 litres
125 ml
m
CAUTION
Never start or operate the saw unless the bar, chain and chain brake lever / front
hand guard are properly installed.
1.
Fill the fuel tank with correct fuel mixture (Fig. 7/pos. 8).
2.
Fill the oil tank with chain oil (Fig. 7/pos. 10).
3.
Be certain the chain brake is activated before starting the unit (Fig. 6/pos 3).
Once you have filled the chain and oil tank, tighten the tank cover securely by
hand.
Do not use any tools to do so.
7. IDLE SPEED ADJUSTMENT
If the cutting attachment still rotates in idle speed, contact Authorized Service
Centers for correct idle speed adjustment.
Note: When the engine is idling the cutting attachment must not rotate under
any circumstances!
Operation
Please note that the statutory regulations governing noise abatement may differ
from one location to another.
Each time before use, check the following:
-
That there are no leaks in the fuel system.
-
That the equipment is in perfect condition and that the safety devices and
cutting devices are complete.
-
That all screws are securely fastened.
-
That the spiked bumper (Fig. 1/pos. 11) is securely fastened. If you need to tighten
it, use the allen key (Fig. 1/pos. 24).
-
That all moving parts move smoothly.
Set up/Operation