background image

Kapitelüberschrift

25

• 

Before storing the chainsaw in a closed room, allow the motor to cool down.

• 

In order to reduce the risk of fire, keep the motor sound absorbers and fuel  

storage area free from organic material and excessive lubricant.

Long-term storage/packing away for winter

• 

If you are storing the machine long-term or for winter, remove all the fuel. 

Fuels are chemical compounds that change their properties when stored 

long-term.  

Removing the fuel must take place outdoors.

m

 WARNING

Improper maintenance or non-compliance or not resolving a problem can 

become a hazard during operation. Only ever work with machines that have 

been serviced regularly and properly. This is the only way you can ensure 

that you can run your machine safely, economically and without problems.

Do not clean, service, adjust or repair the tool when it is running. Moving 

parts can cause severe injuries.

Do not use petrol or other flammable solvents to clean the machine compo-

nents.

m

 WARNING

Fumes from fuel and solvents can cause explosions.

After repairs and maintenance work, re-attach the safety devices to the ma-

chine.

Ensure the machine is operational, in particular, check the fuel system for 

leak-tightness.

Always clear the motor‘s cooling fins of contamination. 

m

 DANGER

The manufacturer of this equipment shall be not liable to the applicable 

Product Liability Act for damages arising in this device or this unit at:

• 

Installation and replacement of non-original spare parts,

• 

Removal or alteration of safety components.

Safety regulations

Summary of Contents for 705551



















































Reviews: