Kapitelüberschrift
24
Kickback is the consequence of incorrect or erratic use of the machine. It can
be prevented by appropriate safety measures such as described below:
• Hold the saw with both hands, ensuring thumbs and fingers clasp
the handles of the chainsaw. Position your body and arms in such a
way that you can withstand kickback forces. If appropriate measures
are taken, the operator can control kickback forces. Never let go of the
chainsaw.
• Avoid an abnormal body posture and do not saw above shoulder
height. This prevents accidental contact with the tip of the guide bar and
it enables better control of the chainsaw in unexpected situations.
• Always use replacement guide bars and saw-chains specified by the
manufacturer. Incorrect replacement guide bars and saw-chains can
cause breaking of the chain and/or kickback.
• Follow the manufacturer‘s instructions concerning sharpening and
maintenance of the saw-chain. Over-reduction of depth limiters in-
creases kickback tendency.
Safety notices for maintenance / storage
Have your machine repaired by qualified specialists and only with original
spare parts. This ensures the safety of the machine. Always follow the main-
tenance and servicing hints in this manual to keep the chain saw in good
working conditions.
1. Before use, always visually check the tool for wear and tear or damage.
Replace worn or damaged components and bolts. Tighten all nuts, bolts
and machine screws to ensure that the equipment is in a safe operating
condition.
2. Regularly check the fuel system for leakage or signs of abrasion, for ex-
ample from porous fuel lines, loose or missing clamps and damage to the
tank or the tank lid. All faults must be resolved before use.
3. Before checking or adjusting the machine or the motor, remove the spark
plug or the ignition cable, respectively, to prevent accidental start-up.
Storage
•
Before storage, clean and maintain the chainsaw according to the instruc-
tions in the chapters in this manual.
•
Always follow the hints of the storage chapter in this manual.
•
Never store the equipment with fuel in the tank inside buildings where the
fumes can come into contact with open fire or sparks.
Safety regulations
