© Ferno-Washington, Inc. / 234-3449-08 / November 2017
26
6.7 Lubricating the Transporter
Disinfect and clean the transporter before applying lubricant. Use
the lubricants designated at right to lubricate the transporter. Do not
lubricate points marked with the “do not lubricate” symbol.
LUBRICATION POINTS
Use a small amount of lubricant. Lubricate identical points on each
side of the transporter.
1.
Slam latch spring (2)
WRL-191S or E-Z-1 (1-2 drops)
2.
Loading-wheel linkage (4)
WRL-191S or E-Z-1 (1-2 drops)
LUBRICATION-FREE ITEMS
Channel
1
Do not lubricate
Rollers
Do not lubricate
Wheels (sealed bearings)
Do not lubricate
Leg pivot points
Do not lubricate
Swivel-caster lock pins
2
Do not lubricate
1
The channels do not require lubrication. Lubricating the channels or rollers will
cause foreign particles to stick to the rollers and channel, causing damage.
2
Clean only with mild detergent and water.
Maintenance
1
2
2
Do Not Lubricate
Lubricate
Applying Lubricant
Use a small amount of lubricant (one or two
drops). Lubricate identical points on each side
of the transporter. After applying lubricant,
wipe off any excess.
Important
Lubricating parts that should not be lubricated allows dirt
and foreign particles to collect on those parts, resulting in
damage. Lubricate
only
the numbered reference points
shown.