manualshive.com logo in svg

Ferno Mondial MB64, User Manual, Page: 33 / 36

Share
Download
Ferno Mondial MB64 User Manual Download Page 33

© Ferno-Washington, Inc. / 234-3480-06 / November 2017

33

8 - PARTS AND SERVICE

8.1  U.S.A. and Canada

In the United States and Canada, to order parts or for professional 

repairs, contact EMSAR® – the only agent authorized by Ferno to 

manage, service, and repair Ferno products.

Telephone (Toll-Free) 

1.800.73.EMSAR

Telephone 1.937.383.1052

Fax +1.937.383.1051

Internet www.EMSAR.com

8.2 Worldwide

To order Ferno parts, and for professional repairs, contact your Ferno 

distributor. Your distributor is the only agent authorized by Ferno to 

manage, service, and repair Ferno products.

Parts and Service

 

WARNING

Improper parts and service can cause injury. Use only 

Ferno parts and Ferno-approved service on the cot.
Modifying the cot can cause injury and damage. Use the 

cot only as designed by Ferno.

Description

Parts Kit

Wheels, conductive (set of four, 150 mm/6” wheels)

083-2239

Wheel, 100 mm (4”) w/hardware

190-2034

Wheel, 150 mm (6”) w/hardware

190-2044

Wheel Fork (only), control end (w/internal lock plate, no 

pedal, and no wheel)

090-5922

Wheel Lock Mechanism, control end (w/pedal, spring, 

hardware, no fork or wheel)

190-2036

Wheel Fork Only (loading end, no wheel)

190-2038

Wheel Axle (loading end, w/hardware)

190-2040

Loading wheel w/hardware

190-2055

Loading-end leg bumper (pair, with hardware)

190-2042

Scuff strips with rollers, complete set of control-end and 

loading end (ST70/MB70)

083-2192

Scuff strips with rollers, complete set of control-end and 

loading end (ST64/MB64)

083-2201

Scuff strip (no rollers), control-end leg only, w/hardware

190-2035

Scuff strips, loading-end leg brace only, (pair, w/

hardware)

190-2045

Leg torsion spring (left/right), control-end leg (w/

hardware)

190-2037

Return spring (only), loading-leg w/hardware

190-2041

Restraint, Harness Mondial MB

120-4016

Restraint, Model 430 2-piece, 1.5m [5']

031-3892

Restraint, Model 430 1-piece, 2.1m [7']

031-3910

Strike pin, control-end weldment

083-2254

Torsion springs, loading-end leg lock

190-2043

Control handle, leg-release (Red)

190-2049

Control handle, swivel-release paddle (Blue)

190-2051

Loading-wheel shank glider (pair)

190-2053

Swivel caster release pin and spring

190-2054

Control-box assembly (loading end or control end)

090-5919

Control-box assembly, center

090-5920

Control-end leg auto-release assy. w/spring

090-5921

Touch-up paint, green

082-2418

Touch-up paint, silver

082-2419

Touch-up paint, black

081-9977

Touch-up paint, red

081-9972

Pulley and extension spring (w/hardware)

090-5939

Summary of Contents for Mondial MB64





































Reviews:

No comments