Ferno Australia |
11 Johnstone Road, Brendale QLD 4500
|
+61 7 3881 4999
|
|
FERNO.COM.AU
©
FERNO AUSTRALIA / 00551 DEC 2021 |
Page 1 of 4
Specifications
DESIGNATION
Winch for raising or lowering personnel or material
MATERIAL
Polymer casing with 4.8 mm galvanised steel wire
LENGTH
20 metres
RATING
Maximum lifting load per EN 1496: 135 kg
Maximum lifting load per Machinery Directive 2006/42/EC: 250 kg
STANDARDS
EN 1496; Machinery Directive 2006/42/EC
PRODUCT LIFE
10 years from Date of Manufacture (DOM) provided the unit is used, maintained and stored according to instructions
and has not been subjected to extreme conditions or harsh environments.
WINCH
APOD-WINCH20M
APOD-FBA Fall Arrest Block Adaptor
is required to secure the winch
to the Arachnipod or Industripod
Series of tripods.
Glossary
Anchor / Anchorage Point
A secure point of attachment on a structure to which a fall-arrest
device may be connected.
Competent Person
A person who has, through a combination of training, education
and experience, acquired knowledge and skills enabling that
person to correctly perform a specified task.
WARNING
Warning safety alerts indicate a potentially hazardous sit-
uation that, if not avoided, could result in injury or death.
NOTICE
Notices emphasise important, but not hazard-related infor-
mation. Failure to follow Notices could result in product or
property damage.
Disclaimer
This manual contains general instructions for the use,
operation and care of this product. The instructions are not
all-inclusive. Safe and proper use of this product is solely at
the discretion of the user. Safety information is included as
a service to the user. All other safety measures taken by the
user should be within and under consideration of applicable
regulations and local protocol. Training on the proper use of
this product must be provided before using this product in
an actual situation.
Retain these instructions for future reference.
Include it with the product in the event of
transfer to new users. Additional copies are
available upon request from Ferno.
SAFETY INFORMATION
WINCH RETAINING PIN
R-CLIP
