background image

Pag 31

Memokey

Memokey

Introduction

This equipment includes a 

keypad

 which allows the door be 

opened in addition to the activation of an auxiliary electronic 
device on entering a personalised code.  
It is possible to programme up to 100 

different personalised 

codes. 
Generally one of these codes is given to each of the system 

users

, taking users to be not just the people that frequently 

access the residence or the area, but also those who will be 
granted access in the future (for example in the case of offi ces). 
In the case of personalised codes, we can prohibit the use 
of any code by a specifi c user just by deleting the code from 
the system. 
Management of all these personalised codes (activation, deac-
tivation, etc) is done by the system 

administrator

 USER MANUAL

NOTES:

 

The SYSTEM ADMINISTRATION can assign a personal 
code for opening the door and/or activate auxiliary devices 
for any of the authorised users.  

 

Users can change their personal code if this option has 
been enabled by the SYSTEM ADMINISTRATOR. 

 

The system has anti-sabotage protection, such that once 
5 erroneous codes have been entered on the keypad it 
will remain locked for 30 seconds, emitting a warning tone 
throughout this period.

Summary of Contents for 100 CODE MEMOKEY cityline





































Reviews: