0310-03
INSTRUCTIONS FOR USE
WALL SLOTTER
FWS-150K
ART.NR. 719810
Overheating
-
The ventilation slots are blocked with dirt.Clean with
dry cloth.
-
The machine does not start when switched on. Check
the mains lead and the fuse/plug.Take to your Ferm
Dealer for repair
-
The motor is defective.Take to your Ferm Dealer.
MAINTAIN TOOLS WITH CARE
Keep the tool clean for better and safer performance.
Store the discs properly in accordance with the maker’s
instructions.
Follow instructions for changing accessories.Inspect tool
and extension cables periodically and if damaged, have
them repaired by a qualified person or authorised service
body.Keep handles free from oil or grease.Keep the venti-
lation slots clean to prevent motor overheating.
Check for damaged parts
Do not use a tool with damaged parts,before further use a
damaged tool must be carefully checked by a qualified per-
son to determine that it will operate properly. Check for
alignment of moving parts, binding or breakage of parts,
mounting and other conditions that may affect its opera-
tion.
A damaged part or guard should be properly repaired by
an authorised service centre, unless indicated otherwise
in the instruction manual. Have defective switches repla-
ced by an authorised service centre. Do not use a tool if
the switch does not turn on and off.
Have your tool repaired by an expert
This appliance is manufactured in accordance with rele-
vant safety standards.Only experts must carry out repai-
ring of electrical appliances,otherwise considerable dan-
ger for the user may result.
Storing tools
When not in use tools should be stored in the dry,out of
reach of children.
ELECTRICAL INFORMATION
This product is complete with a pre-wired mains plug,it is
double insulated in accordance with EN 50144 – no earth
wire is required
If the plug needs replacing follow these instructions.
Wire correctly
The wires in the mains lead are coloured in the following
way:
BLUE
-Neutral
BROWN
-Live
Securing wires
Secure wires carefully and firmly to the correct terminals.
Secure the mains cable in the plug cord grip firmly.
Fit a 13-amp fuse. If a 13amp (BS1363) plug is used a (BS
1362) ASTA approved 13-amp fuse must be fitted.
Recycle/Dispose of old plug and cable
Prevent inadvertent connection to socket and risk of elec-
tric shock.
ENVIRONMENT
Recycle the packaging according to the identification
marks on it.
At the end of the product or its accessories life please re-
cycle where facilities exist - phone the Helpline for cur-
rent advice on recycling.
Helpline
For any questions relating to operational or safety
matters contact:
Ferm Customer Helpline on:
0115 966 1199
Monday-Friday
8am – 6pm
Saturday
9am – 1 pm
GUARANTEE
The guarantee conditions can be found on the separately
enclosed guarantee card.
We declare under our sole responsibility that this
product is in conformity with the following
standards or standardized documents
EN-50144-1,prEN50144-2-3,
EN-55014-1,EN-55014-2,
EN61000-3-2,EN61000-3-3,
in accordance with the regulations:
98/37/EEC
73/23/EEC
89/336/EEC
from 01-12-2001
GENEMUIDEN NL
W.Kamphof
Quality department
CE
ı
DECLARATION OF CONFORMITY
(UK)
Blue
(Neutral)
Green & Yellow
(Earth)
Brown
(Live)
Fuse
(13 Amp)
