7
Description of the remote
1. Standby/Power:
Turn the unit on or off.
2. Number key
Press to enter numbers. (Press +10 to
select double-digit number)
3. Set
Time set button.
4. Input
Recycle select AUX1--AUX2--AUX3--TUNER
input mode.
5. Memory
This button lets you store radio stations
into the station memory.
6. Subwoofer /-
Subwoofer volume level up or down.
7. Mute
Turn on or off the sound.
8. [
] [
]
Press these buttons to move or select the
time you need.
9. Effect
Press this button, the system turns into
3D sound effect, press it again to disable
3D sound effect.
10.Scan +/-
Press this button to automatic tuning.
11.FM/AM
To toggle the radio band FM/AM.
12.Master /-
Master volume level up or down.
13.Tuner +/-
Press this button to manual tuning.
To install / replace the battery
The remote control uses a pre-installed lithium battery. To
prevent an anticipated discharge of the battery, we’ ve inserted
an insulating strip. Please pull it out prior to first operation.
Should the r/c start to work unreliably replace the battery with a
new one of the same type. Open the battery compartment. Pull
out the battery mounting in the direction of arrow. Before you
take out the empty battery, please memories its position. The
+ marking must show upwards, otherwise the r/c will not work
and may be damaged. Replace the cover.
Note:
Please discard the used battery properly.
Never throw batteries into fire.
