23
Using the TV as a monitor
This TV can be used as a monitor for a portable computer or PC. Refer to
on page 14 and more
information about connecting to the PC. Use the remote control or the front panel to select the PC-IN
input as the source signal for the TV (see
on page 16). The following
resolutions are supported:
• VGA
640*350 (70 Hz)
• VGA
640*480 (50/60/66/70/72/75/85 Hz)
• VGA
720*350 (70 Hz)
• VGA
720*400 (70 Hz)
• SVGA
800*600 (56/60/72/75/85 Hz)
• MAC
832*624 (75 Hz)
• XGA
1024*768 (60/70/75/85 Hz)
• SXGA
1280*1024 (60/75 Hz)
• MAC
1152*870 (75 Hz)
Using the card reader function
The LCD TV provides the card reader function to enable you
to view digital images directly on the screen without needing
to connect to a PC. The LCD TV supports CF, SD/MMC, MS,
and SM cards. Insert the card in the appropriate card slot and
proceed to view your images as follows:
1. When you insert the card into the memory card slot, the
TV switches automatically to card reader mode. A
thumbnail list of the images on the card are displayed.
2. To view an image in full-screen mode, select an image
using the arrow keys and press the PREVIEW/FULL
button on the remote control. Press the button again to
return to thumbnail mode.
3. Press the AUTOPLAY button on the remote control to
start an automatic slide show of all the images. All the
images are displayed sequentially. Press the button again
to stop the slide show.
4. Press the ROTATE button on the remote control to rotate
the selected picture by 90º in the clockwise (right)
direction.
5. Press the CARD PLAY button to play an audio or video
clip present on your flash memory card.
SCART
AUTO PLAY
PIP/POP
ROTATE
SUB SOURCE
CARD PLAY
POSITION
PREVIEW/FULL
SWAP
SOUND
AI AUDIO
VIDEO MUTE
SURROUND
TELETEXT
SUB PAGE
INDEX
VOL
MUTE POWER
VIDEO
MODE
AUDIO
MODE
0FF
TIMER
DISPLAY
CH
1
2
3
4
5
6
7
8
9
0
MENU
PAGE
ZOOM HOLD
COMPONENT
PC
WIDE
+
-
- --
/
TV/AV/S
FERGUSON
CF
SD/MMC
SM
MS
