Toughened ultra-clear glass lens with an anti-reflective coating
Accessories: 1*lanyard, 1*spare O-ring, 1*belt clip, 1*body clip, 1*fastening elastic rubber band
Operating Instruction
Dual Switches
The round switch is the tactical switch and the oval switch the functional switch.
ON/OFF
Tap the tactical switch to momentarily turn on the light; release and the light will go out.
Fully press the tactical switch to constantly turn on the light. Press again to turn off the light.
Strobe
With the light switched on White mode - long press the functional switch to activate strobe. Click
once again to return to previous output.
With the light switched off, press the functional switch for instant strobe activation on White
mode, or to enter the High on Infrared mode. Release it the light will go out.
Output Selection
With the light on on White mode - single click the functional switch to cycle through
Low→Med→High→Turbo.
With the light on on Infrared mode - single click the functional switch to cycle through
High→Low.
Mode Switching
Rotate the light head to switch between white and infrared light.
Intelligent Memory Circuit
The light memorizes the last brightness level used on White light mode. When turned on again
the previously used brightness level will be recalled
.
Low-voltage Warning
When the voltage level drops below the preset level, the flashlight is programmed to downshift
to a lower brightness level until Low output is reached. When this happens in Low output mode,
the flashlight blinks three times every five minutes to remind you to charge the light or replace
the battery. To ensure normal use, the flashlight will not turn off automatically and will work till
the battery runs out completely. (White light flashes on white mode and IR flashes on infrared
mode.)
Intelligent Over-heat Protection
The light will accumulate a lot of heat when used on Turbo output level for extended periods.
When the light reaches a temperature of 65
℃
or above, the light will automatically step down by
a few lumens to reduce temperature. When the temperature is reduced, the output will gradually
return to Turbo output level.
