Feniex Industries, Inc.
1.800.615.8350 /
feniex.com
5
WIRING INSTRUCTIONS
1. In order to power the unit,
extend the red, 12V+ wire to
the 12V+ post of the vehicle's
battery with the appropriate
fuse size. Extend the black 12V-
wire to the ground post of the
vehicle's battery.
2. To turn the lightstick on,
connect the brown wire to a 12V+
source.
3. Momentarily connect the
orange wire on a 12V+ source to
change flash patterns.
4. For left arrow function,
connect the violet wire to a
12V+ post (switch). There are 3
different left arrow flash patterns.
To select a pattern, engage the
violet wire to a 12V+ source and
momentarily connect the orange
wire on a 12V+ source to select
the desired pattern.
5. For right arrow function,
connect the blue/white wire
to a 12V+ post (switch). There
are 3 different right arrow flash
patterns. To select a pattern,
engage the blue/white wire to a
12V+ source and momentarily
connect the orange wire on
a 12V+ source to select the
desired pattern.
6. In order to achieve a
center out directional
pattern, connect both the
blue/white and violet wires
to a 12V+ post (switch).
There are 3 different center
out flash patterns. To
select a pattern, engage
the blue/white and violet
wires to a 12V+ source
and momentarily connect
the orange wire on a 12V+
source to select the desired
pattern.
7. For takedown steady
functionality, connect the
yellow wire to a 12V+ post
(switch).
8.
For takedown flashing,
connect the orange/white
wire to a 12V+ post.