TM
FENIEX.
2016
INSTRUCTION MANUAL
WEB.
www.feniex.com
8
Mounting Control Head
Decide which mounting option you would like to implement for the 4200 controller:
Option A
is a vertical mount, allowing the controller to hang down.
Option B
is a surface
mount; with the bracket mounting from the rear of the controller. The controller can
also be mounted with a custom face on a console mount. Please contact your preferred
console manufacturer for a 4200 console faceplate (option not shown).
Option A: Vertical Mount
Step 1: Select a dry, cool location to mount
the control head
Step 2: Remove the two factory provided
screws located on either side of the
controller.
Step 3: Place the U-Shaped bracket into
place and screw the two factory provided
screws back on each side of the controller.
Step 4. Connect the RJ45 cable to the RJ45
port located on the rear of the controller).
Option B: Surface Mount
Step 1: Mount the U-Shaped Bracket in the
desired location using 2 self-tapping screws.
If you wish to use machine screws, simply
drill out the required hole size based on the
size of screw choice.
Important! Make sure not to damage any
vital parts of the vehicle or mounting
surface. Do not mount anywhere that
interferes with the vehicle air bag.
Step 2: Re-attach the control panel head to
the U-Shaped bracket utilizing the factory
provided screws.
Step 3. Connect the RJ45 cable to the RJ45
port located on the rear of the controller.
V
3.1
