1.1.5.10 Handrails
• Make sure that you use the handrails at all
times.
• Always keep 3 points of contact when you go
up or down a ladder.
• Be careful when you are high up on the
machine, if you fall it can cause an injury.
GUID-B4BF5956-B0F7-43A5-85C1-706D96BCA02B-high.jpg [High]
Fig. 11
1.1.5.11 Procedure if the machine touches a high-voltage source
You must keep the machine away from
overhead power cables.
If the machine and electrical cables touch, do this
procedure:
• Disengage all the drive components.
• Stop the engine.
• Apply the parking brake.
• Make sure that you can exit the operator seat
safely and do not touch the electrical cables.
• Jump from the last step, make sure that there
is no contact between your body, ground and
machine.
• Do not touch the machine until the electrical
power is set to OFF.
• Tell personnel not to touch the machine.
• Tell the applicable local authorities to disengage
the power.
GUID-DB0A93E4-AEB5-49D5-AC5F-DD1454F1CFC6-high.jpg [High]
Fig. 12
1.1.5.12 Start the engine
Move all hydraulic controls to the hold position before you start the engine.
Make sure the machine is in park.
Press the clutch pedal before you turn the ignition key. The starter will not operate until the clutch has been
pressed. To stop the starter, turn the key to off or release the clutch pedal.
Diesel engine exhaust contains material of combustion which can be dangerous. Always operate the
engine in an open area. If in a closed in area, send the exhaust out.
WARNING:
If you turn the steering wheel with the transmission in the neutral position and the engine
at idle speed, the machine will turn.
WARNING:
Do not use ether. Ether will cause engine damage and/or personal injury.
Do not start the engine until the area is free of personnel to prevent personal injury because of unexpected
machine movement.
GUID-EC20C12A-E05F-4CE0-9228-2B8D7428C65C [V1]
GUID-37F2AAFC-7DFC-42FC-82F8-48D9CD0435FE [V1]
GUID-2E3C7B6F-A752-44EE-B844-B55CE068E322 [V2]
1. Safety
15
609148D1A
