FENDT 8380 P - 8410 P - EAME
29
D3157100M2 - S/N 582000001 - 582400000 - 583000001 - 583400001
1
1. General Information
Crop_this_page
3.
Hydraulic ram for reel fore/aft
4.
Hydraulic ram for reel up/down
5.
Main crop elevator
6.
Crop elevator chain
7.
Elevator chain top shaft
8.
Operator cab
9.
Steering wheel
10. Operator seat
11. Cylinder access door
12. Unloading auger/tube
13. Rotary Separator
14. Tank filling auger
15. Grain tank
16. Rear Beater Curtain
17. Tank filling elevator
18. Engine
19. Hydrostatic pump (transmission)
20. Straw walkers
21. Unloading tube
22. Straw hood
23. Straw divider
24. Cutting table
25. Feathering fingers
26. Table Auger
27. Elevator chain front shaft
28. Elevator chain slats
29. Hydraulic table lift ram
30. Threshing cylinder
31. Traction wheels
32. Concave
33. Rear beater
34. Hydrostatic motor (transmission)
35. Main grain pan
36. Fanning mill
37. Straw walker front crank
38. Bottom fan deflector
39. Top fan deflector
40. Returns thresher
41. Good grain auger
42. Returns auger
43. Top and bottom shaker shoe
44. Top sieve
45. Bottom sieve
46. Sieve extension
47. Rear wheels
48. Straw walker rear crank
49. Chaff spreader
50. Straw chopper
51. Spreader hood
1.4.2
Crop Processing
T022859
The crop that is harvested with the combine goes
through five different stages of processing.
1. Feeding
2. Threshing
3. Separation
4. Cleaning
5. Grain Tank and Unloading
These stages are explained in the following sec-
tions.
N
OTE
:
The illustrations are intended as generic ex-
amples of the machine functionality and might
therefore be visually different from the appearance
of the purchased machine.
I052173
Fig. 2.
