FENDT 8380 P - 8410 P - EAME
13
D3157100M2 - S/N 582000001 - 582400000 - 583000001 - 583400001
1
1. General Information
Crop_this_page
1.1
Dear Customer
1.1.1
Preface
T020419
Your new combine is a self-propelled harvesting machine. It has been designed to harvest, gather, thresh,
separate and clean grain and seed crops. The crop is stored after threshing and cleaning in the machine's
grain tank, and the straw is left on the ground.
This operator's manual should be used as a handy reference book, as it contains all practical information
about the operation, adjustment and maintenance of your new machine.
The combine has been designed and engineered for maximum performance, comfort and ease when work-
ing in a variety of crops and under varying harvesting conditions.
Prior to delivery, the machine has undergone a thorough inspection, both at the factory and at the dealer, to
ensure that it is in perfect condition when you receive it.
Periodic maintenance must be performed at the recommended intervals to keep the machine in good condi-
tion and ensure smooth operation.
N
OTE
:
Read this operator's manual carefully before you start to drive and/or operate the combine, and pay
particular attention to the section on safety measures.
Keep the operator's manual within easy reach for additional information when needed.
The terms "left" and "right" should be understood to mean in the forward direction of the machine.
For more information on the combine, please contact your authorised dealer. He has specialised personnel,
original spare parts and the equipment necessary to cover any service needs.
N
OTE
:
–
This machine has been designed and produced in conformity with the Machinery Directive 2006/42/EC.
An EC declaration of conformity is supplied with the machine at delivery (see the copy in the EC decla-
ration of conformity section).
–
This book is published all over the world, and the opportunity to acquire the equipment shown either as
standard or optional varies depending on the area in which the combine is to be used.
The specifications may differ from those described in the operator's manual, depending on the choices
made by the customer.
–
In order to provide a better view of a component or setting, some illustrations in this operator's manual
show a unit without standard guards or panels required by law in various countries.
The machine should never be operated in this condition. For your own safety, please check that
all safety guards are closed and properly installed before starting the machine.
–
This operator's manual should be kept with the other manuals for the machine (e.g. for the table, table
trailer, guide system, etc.) in the space under the instructor seat, so they can be easily consulted when
needed.
1.1.2
Company policy
T020420
We are working constantly to improve our products, and we therefore reserve the right to make changes and
improvements of any kind and at any time, without requiring these changes and improvements to be made
on machinery and equipment that has already been sold. The information in this manual relates to the current
situation at the time when this manual was written. All data provided may vary.
1.1.3
Optional Extra
T020421
The combine is designed to work in a variety of crops and under very different conditions. Nevertheless, the
optional extras may be necessary in some cases to improve machine performance or to work in special crops
or under special harvesting conditions. A list of optional extras can be found in the "Optional Extras" section.
1.1.4
Spare parts and accessories
T020424
The original spare parts and accessories have been designed specifically for this type of machine.
We can only guarantee correct operation and optimum performance when original parts supplied by the au-
thorised dealer are used.
