1.1 General information
1.1.1 Introduction to this service manual
This service manual gives information from engineering tests, operating data, and the latest service
techniques at the time of publication. Read this service manual carefully before doing any service on the
machine.
The photos and illustrations used in this service manual were current at the time of publication. Production
changes can cause machines to vary from the photos and the illustrations. The manufacturer reserves the
right to redesign and change machines as necessary without notification.
WARNING:
Some pictures in this manual show the machine with shields or guards removed to permit
for a better view of the subject of the picture. All shields and guards must be in position
before operating the machine.
Machine movement when in normal use determines right-hand and left-hand.
1.1.2 Units of measurement
Measurements are given in metric units followed by the equivalent in US units. Hardware sizes are given in
millimeters for metric hardware and inches for US hardware.
1.1.3 Table of contents
This manual has a table of contents at the front. The table of contents shows the divisions. The individual
divisions also have a table of contents.
1.1.4 Page numbers
All pages have two numbers, such as 01-25. The first number shows the division. The second number
shows the page in the division.
Page numbers occur on the lower right-hand or lower left-hand corner of each page.
1.1.5 Intended use
Only use this machine for usual agricultural operations.
Do not use this machine for each operation or object other than those set out in this manual. The
manufacturer accepts no liability for damage or injury caused by incorrect use of this machine.
Compliance with the conditions of operation, maintenance and repair (specified by the manufacturer) are
necessary for the recommended operation of this machine.
Only approved persons who know the machine (and the safety procedures) must operate, do the servicing
and repair this machine.
Always obey all the safety and local road regulations.
Not approved changes made on this machine release the manufacturer of all liability for caused damage or
injury.
1.1.6 How to correctly dispose of the waste
The incorrect disposal of the waste can cause contamination to the environment. Bad equipment waste
can include (but are not limited to) oil, fuel, coolant, brake fluid, filters, battery chemicals, tires and other.
Use a leak safe container when you drain the fluids. Do not use a food or drink container to collect waste
fluids, it can cause a person to drink from them.
Do not put or spill waste on the ground, down a drain, or into a water source.
[V]
GUID-D0FA2E94-0D28-42E9-A80B-6BB593BA9687 [V1]
GUID-EBB3FCAE-8712-43A9-BB65-1DB48189C57C [V2]
GUID-9BD2A110-651C-40FC-8D40-EDBAFD670A3C [V1]
GUID-6300C4A8-D25F-4B2F-BDC2-FAC58F99378B [V1]
GUID-939752D3-F912-4AFA-9CE0-FF5251AFAD3D [V4]
GUID-D27C9EFF-D3E3-4F5E-93ED-A6E5560C23DF [V4]
1. General
Pickup Header
1-3
79037386D
Find manuals at https://best-manuals.com
