1.2.6 The service manual
Read the table of contents and basic layout. Become familiar with all parts of this service manual. This
service manual gives the technician very important information.
Machine movement when in normal use determines right-hand and left-hand.
This manual covers general safety practices for this machine.
The photos, illustrations, and data used in this manual were current at the time of printing. Inline
production changes can make machines vary from the information in the service manual. The manufacturer
reserves the right to redesign and change the machine as necessary without notification.
WARNING:
In some of the illustrations and photos used in this manual, shields or guards may have
been removed for clarity. Never operate the machine with any shields or guards removed.
If the removal of shields or guards is necessary to make a repair, they must be replaced
before operation.
1.2.7 Operation
1.2.7.1 Prepare for operation
Read and understand the operating instructions and precautions in this manual before you operate or
perform service on the machine.
Make sure that you know and understand the positions and operations of all controls. Make sure that all
controls are in neutral and the parking brake is applied before you start the machine.
Make sure that all persons are a sufficient distance from your area of work before you start or operate the
machine. Do checks on the controls and learn all controls in an area clear of persons and objects before
you start work with the machine. Know the dimensions of the machine and have sufficient space available
for operation. Do not operate the machine at high speeds around persons, buildings, other equipment, etc.
Always use correct procedures when you do tasks around and operate the machine. Do not let children or
persons who do not know how to operate the machine operate the machine. Keep other persons away
from your area of work. Do not let other persons ride on the machine.
Make sure that the machine is in the good mechanical condition. Make sure that the machine has the
correct equipment as necessary by local regulations.
All equipment has a limit. Make sure you understand the speed, brakes, steering, stability, and load
characteristics of this equipment before you start.
1.2.7.2 General information
When parking, park the machine on a solid level
surface and lower the header to the ground. Put all
controls in neutral, and apply the parking brake.
Stop the engine and take the key with you.
WARNING: Whole body crushing
hazard. A loss of hydraulic pressure or
movement of the mechanism can
cause the raised machine component
to fall.
Personal injury or death can occur.
Install the lift cylinder stops before
working on the machine to prevent
movement.
GUID-E77631FB-0DC0-4637-9090-88018315176E-high.jpg [High]
Fig. 4
GUID-0CC50E5C-AD62-4FFD-9435-62214FEFA5F4 [V1]
[V]
GUID-A9D74CBD-C409-4BEA-B8C1-A3DA5AE3C5EC [V5]
GUID-37023B41-C0ED-4F86-A909-1F42C1FE5D97 [V4]
1. General
Pickup Header
1-7
79037386D
Find manuals at https://best-manuals.com
