FENDO OY F-19S, Instructions For Use Manual, Page: 3 / 23

2
1. Introduction
Slicing machine F-19S is developed especially for use in the retail and wholesale trade
as well as in industry. As the slicer is constructed of stainless materials it will remain
clean and in good condition for a long time. This guarantees a long life and trouble free
operation.
This machine is intended specifically for cutting meat slices, strips and cubes. Also
cutting slices of liver is made fast and easy with this slicer.
Because of the simple construction the machine is easy to disassemble, which enables
easy maintenance and cleaning.
Due to the automatic cutting process, there is no need for any special pushing device
that might damage the blades or lead to cutting fingers.
Only use the machine for its intended purpose. If misused, the machine can inflict
damage to the user
.
2. Technical specifications
Power
1,5 kW
Voltage 400 V / 50 Hz / 3-phase
Current 4,3 A
Rotational speed 1000 1/min (motor)
Measures of the machine:
Measures of the table:
Size of the blade: Ø 200 mm x 1,2 mm (7-7/8 x 1/21 in)
The machine is equipped with a low voltage control relay, thermal relay and direction
control switch.
Height 710 mm
Width 500 mm
Depth 770 mm
Weight 85 kg
Height 515 mm
Width 400 mm
Depth 700 mm
Weight 11 kg