background image

39

FOOTSWITCH USE

Three foot-control devices can be used with Mustang GTX ampli

fi

ers—the 

GTX-7 

and

 MGT-4 

footswitches 

and the 

EXP-1 Expression Pedal

The seven-button GTX-7 Footswitch comes with Mustang GTX100 and is optional for Mustang GTX50. It en-

ables convenient remote foot control of several functions, including the built-in tuner, amp preset selection, 

e

ff

ects bypass, 60-second looper and more. The EXP-1 Expression Pedal, optional for both Mustang GTX amps, 

is a dual-mode digital pedal that controls Mustang GTX volume and amp/e

ff

ect parameters. 

 

The four-button MGT-4 Footswitch is optional for both Mustang GTX amp models. Note that instructions for 

using the MGT-4 Footswitch can be found online in the 

Mustang GT Guitar Ampli

fi

er Expanded Owner’s Manual 

Rev. A 

(PN 7712493000), and in the 

Mustang GT Guitar Ampli

fi

er Addendum to Expanded Owner’s Manual Firm-

ware V2.0

 (PN 7715279000).

Connect the GTX-7 or MGT-4 footswitch to the FOOTSWITCH jack on the amp’s rear panel. The ampli

fi

er auto-

matically defaults to the connected footswitch while the amp is fully booted. The GTX-7 or MGT-4 footswitch 

can be combined with the EXP-1 Expression Pedal by “chaining” the two pedals together.

 

The GTX-7 Footswitch has seven buttons—a BANK UP button at upper left, a MODE/TUNER button at upper 

right, and 

fi

ve numbered FUNCTION buttons along the bottom. Three MODE LEDs are at upper right, and 

fi

ve 

FUNCTION LEDs are arrayed with one above each FUNCTION button. The DISPLAY WINDOW is at top center.

A.  BANK UP BUTTON:

 Used to move up and down through consecutive groups (“banks”) of 

fi

ve presets.

B.  DISPLAY WINDOW:

 Displays footswitch function currently in use. 

C.  MODE LEDS:

 Color-coded LEDs indicate which of three modes is in use—PRESETS (red), EFFECTS (amber) 

or LOOPER (green).

D.  MODE/TUNER BUTTON:

 Used to select among PRESETS, EFFECTS and LOOPER modes; press and hold for 

chromatic TUNER mode.

E.  FUNCTION BUTTONS/LEDS:

 Five numbered buttons enable foot control of various Mustang GTX func-

tions, depending on footswitch mode in use. Red LEDs above each FUNCTION BUTTON indicate various 

functions in use.

GTX-7 FOOTSWITCH FEATURES

Summary of Contents for GTX-7







Reviews: