Fema S40-C1, User Manual, Page: 19 / 28

FEMA ELECTRÓNICA . Series S . S40-C1
19
Password
Version
Factory reset
Minimum
Brightness
Maximum
Standard
Left zeros
With left zeros
Without left zeros
Function counter (‘cn.1’)
Decimal point no
Counter configuration
Multiplier x1
Divider /1
Preset 0
Mode up
‘FAST’ off
Sensor
Pulls on channel A no pull resistor
Pulls on channel B no pull resistor
Pulls on reset pull-up
Trigger 2,5 Vdc
Activation for channel A on rising edge (‘on_h’)
Excitation voltage 5 Vdc
Antirrebound filter 0 mSeconds
Tools
Fast access (Key UP) off
‘On Power Up’
Delay 0 seconds
Key ‘LE’ reset function
Memory of maximum -1999
Memory of minimum 9999
Memory of cycles 0
Counter overrange flash
Counter underrange flash
Left zeros off
Vexc. control off
Password off
Brightness 3
Alarms 1 and 2
Active off (disabled)
Type maximum
Setpoint 1000
Hysteresis 0 counts
Activation delay 0.0 seconds
Deactivation delay 0.0 seconds
Setpoint 2 off
On Alarm continue
Inverted relay off
Locked alarms off
Factory configuration for Ratemeter (‘cnF.6) and periodmeter (‘cnF.8)
modes.
Multiplier x1
Divider /1
Time windows 0.5
‘SLOW’ mode
tIME 0 (off)
nuMb 1
Recursive filter 0 (off)
1.20 Full configuration menu (cont.) 1.21 Factory configuration
Control Vexc.
with Vexc. error control
without Vexc. error control
Option 1
Configuration menu for the module installed at Opt.1
Option 2
Configuration menu for the module installed at Opt.2
Option 3
Configuration menu for the module installed at Opt.3