Fema I4 Series, User Manual

Page: 20 / 24

F E MA · MANUFACTURING FOR INDUSTRIAL AUTOMATION 20
14. Full configuration menu
Press ‘ SQ ’ (
<
) for 1 second to access the ‘ configuration menu ’. For
a description on how to operate inside the menus see section 12.
For a full vision of the ‘ configuration menu ’ structure see section 13.
Function code
Enter the function code (see section 8)
Input conf. Mode
Load cell mode
Millivolt mode
Signal range
0/5 mV
0/10 mV
0/15 mV
0/20 mV
0/25 mV
0/30 mV
0/40 mV
0/50 mV
0/60 mV
Excitation voltage
Excitation voltage
0/70 mV
0/80 mV
±10 mV
±20 mV
±30 mV
±40 mV
±50 mV
±60 mV
±70 mV
±80 mV
±5 mV
Output range
‘ok’ message flashes while
the ‘field correction’ function
is being applied and when
finished, the instrument
returns to previous menu
entry.
Field correction
Field correction
low
Field correction
low
Advanced scaling
Input signal low (in mV’)
Input signal high (in mV’)
Output signal low
Output signal high
Process low
Process high
Process decimal point
Tare value (in mV’)
Display
information
Input signal value (in mV’)
Output signal value
Label
Process value
Signal percentage
Tare value (in mV’)
Excitation current
Excitation voltage
Millivolts at signal terminals (in mV)