Fema Electronica S40-P, User Manual

Page: 14 / 20

FEMA ELECTRÓNICA . Series S . S40-P
14
1.12 To access the instrument
1.13 Modular system
Series S panel meters are designed to create a modular system. This
modular system allows for addition, replacement or substitution of
any of the internal modules conforming the instrument. Below is a
graphic explanation for the position of each module.
Risk of electric shock. Removing the front cover will
grant access to the internal circuits. Disconnect the
input signal to prevent electric shock to the operator.
Operation must be performed by qualified personnel
only.
You may need to access the inside of the instrument to add or re -
place internal modules. Use a flat screwdriver to unlock the upper
clips marked with ‘A’. Then unlock the lower clips marked with ‘B’ and
remove the front cover. Let the inside of the instrument slide out of
the housing.
To reinsert the instrument make sure that all modules are correctly
connected to the pins on the display module. Place all the set into
the housing, assuring that the modules correctly fit into the internal
guiding slides of the housing. Once introduced, place again the front
cover by clipping first the upper clips ‘A’ and then the lower clips ‘B’.
A
B
Front Filter Display Module Optional Control Modules
Input Signal Module
Housing
Power Supply Module
Opt.2
Opt.1