INSTALLATION GUIDE - AUSTRALIA
AXISS BASIN MIXER BLACK
AXBMBA
SYSTEM REQUIREMENTS
To ensure the optimum performance and customer satisfaction please adhere to the following:
• Flush out all pipe work prior to installation.
• Maximum hot water temperature is 60˚C. If the water temperature exceeds 60˚C an approved tempering valve must
be fitted.
• Installation should comply with relevant local authority requirements.
• In accordance with good plumbing practice, filters should be fitted to supply lines to eliminate damage to the
ceramic cartridge from suspended solids.
• AS/NZS 3500.1 states that pressures above 500kPa can cause damage from water hammer, reduce the life of
appliances, taps & fittings, cause excessive noise in the system and recommend that a pressure limiting valve (PLV)
be fitted.
Failure to comply with the above will void warranties
MAXIMUM STATIC PRESSURE
MINIMUM STATIC PRESSURE
Maximum static pressure 1500kPa. If water
pressure exceeds or is likely to exceed
1500kPa, an approved pressure limiting
valve must be fitted.
HOT
COLD
150kPa
150kPa
Mains Pressure
WHAT IS IN THE PACK
1 x basin mixer
1 x red key for aerator
2 x supply hoses
1 x basin flange
1 x basin fixing kit
1 x basin flange o-ring
1 x hex socket spanner
