background image

Assembly instructions

Motific

 Adjustable

Model # MOA-12-33344

(In order of blanks)

1 = S,B,W (column finish)

2 = S,B,W,A (base finish)

333 = RND, AMP (top shape)

44 = AW,DW (laminate color)

Height adjustable portable tech table

round top

amorphic top

Summary of Contents for esi Motific Adjustable MOA-12-33344

Page 1: ...uctions Motific Adjustable Model MOA 12 33344 In order of blanks 1 S B W column finish 2 S B W A base finish 333 RND AMP top shape 44 AW DW laminate color Height adjustable portable tech table round top amorphic top ...

Page 2: ...p 1 attach the assembly hook If the accessory hook is already installed with tape proceed to step 2 Place the accessory hook in position on the table support as shown below left Secure the hook in place with tape while the worksurface is installed as shown below right base assembly with adjustment handle 1 round top 1 amorphic top 1 or accessory hook 1 10x11 4 wood screw 4 table support accessory ...

Page 3: ...lace the release handle on the bottom of the table and align with the pre drilled handle placement holes Fasten the handle to the top using the two 10x3 4 Remove tape from accessory hook and twist tie from paddle assembly Step 3 turn the assembled table upright and adjust to desired height Turn the table upright and place it in its final position To adjust height squeeze the release handle Lift up...

Page 4: ...ranty and the purchaser s sole remedy is limited to the repair or replacement at ESI s option of the product or any defective part Costs such as installation or express shipping incurred due to replacement of products are not covered under warranty IN NO EVENT SHALL FELLOWES ITS AFFILIATES SUBSIDIARIES RELATED ENTITIES OR THEIR RESPECTIVE OFFICERS DIRECTORS OR EMPLOYEES BE LIABLE FOR INCIDENTAL CO...

Reviews: