Page 2
KataEX3-FMS
Components and tools
Please review
these instructions before beginning the installation. Use the illustrations below to check that all the components needed for your
installation were provided with your order. Do not discard the packaging until the product works to your satisfaction.
Components and tools
Additional tools required
• Phillips screwdriver
Caution
• Hand tighten screws only. Do not use power tools.
clamp or grommet mounting:
dual Allen key (1)
2mm and 4mm
fixed-motion monitor arm assemblies (2)
stubby monitor arm assembly (1)
VESA mount
assemblies (3)
connection
sleeves (2)
VESA plate screws (12)
set screws (7)
decorative covers (2 sets of 4)
cable clip (1)
cable clip (1)
M4x10
M4x15
set screws (2)
M4x9
clamp mounting only:
grommet mounting only:
grommet base
assembly (1)
clamp base
assembly (1)
base
cover (1)
grommet bar (1)
grommet knob (1)
base
cover (1)
